|
NEW:
Bardo Finger Flex
All of our wheels
are shapeable and they are
self-dressing! For operations using
automatic sanding machinery we are
quite knowledgeable as to what
speeds different boards should be
powerfed at, what the RPM's of the
sanding wheel should be for optimum
sanding results, which direction the
head should be spinning and which of
our many specs of wheels will work
best for YOUR application! Here are
just a few of many Bardo Flex
Shapeable Sanding wheels!
Click
Here for Sanding Wheel
Recommendations
|
Bardo Flex
Impregnated Flapwheels..
are versatile
treated non-woven abrasive
flapwheels for light sanding raw
hardwood, softwood & MDF lineal
mouldings, scuffing hard UV
coats for adhesion between
coats, seal sanding and more.
•
Treated to maximize
cutting ability and
life (up to 100,000
board feet per
wheel!)
• Provides a soft to
glossy finish on
primers and UV
finishes
•
Hold complex
profiles extremely
well
•
Non-loading
•
Impressive, smoother
finishes
•
Available in a wide
variety of grits,
grains & densities
•
Available in a HARD
treatment & SOFT
treatment = you
choose |
|
|
Bardo Flex
Interleaf Flapwheels
are made with soft, white
sandpaper between gray non-woven
abrasive to create a wheel ideal
for prep work before staining,
sealing or priming on raw
hardwood, softwood & MDF lineal
mouldings.
•
Defuzzing wheels for
raw lineal mouldings
•
Removes raised fibres after stains,
primers & sealers
without disturbing
coat below
•
Available in 80,
120, 150, 180, 220 &
320 grit sizes
•
Up to 36" wide, in
increments of 1/4"
•
WHITE Interleafs
have nonabrasive
material between
sandpaper for even
finer finishes |
|
|
Bardo Flex
Woodworking Wheels
are polyurethane foamed wheels
with either Garnet or Silicon
Carbide, and they are the
hardest wheels available for
sanding knife marks off raw
boards only.
•
Closed workface on
sanding wheels = non
loading
•
Sands on double-end
tenenors,
throughfeed sanding
machines & verticle
spindle sanders
•
Rotate 8" OD wheels
800 - 1000 Rpm range
when sanding on
hardwoods
•
1700 Rpm acceptable
speed for sanding on
MDF & pine
• 4
densities available
- Xtra High (KW),
High (HD), Low (JL)
& Soft (SD)
•
Rotate sanding heads
slower & INTO
direction of feed
for optimum sanding |
|
|
Bardo Flex Flapwheels
are flexible,
very conformable wheels made
with all non- woven abrasive
material.
•
Very soft finishes
can be achieved
using these wheels
at the end of
staining or sealing
process
•
Variety of grains &
grit sizes offer the
possibility of many
different finishes
•
White Type-T
Flapwheels made with
nonabrasive material
•
White Type-T
Flapwheels ideal for
wipeoff operations
•
All Flapwheels
available 36" wide
in 1/4" increments
|
|
